Square D 9013FHG32J55M1 Pressure Switch

Schneider Electric / Square D Pumptrol Pressure switch is used to control air in small electrically driven air compressors. It has a 9013FH pressure sensor of size 100 psi that switches OFF at 150 psi. Switch has rugged polypropylene cover for added durability. It has a nitrile diaphragm pressure actuator that operates from any position. It regulates between two thresholds. The four-terminal block switch comes with 5.261 and 10 AWG screw-clamp terminals for electrical connection. Switch has an adjustable rising pressure range of 70 – 150 psi at 30 psi approximate adjustable differential. Switch with two NC, Form YY, DPST-DB, snap-action contact type for high conductivity. It provides cable entry through two 0.88-Inch cable entries with 0.84-Inch across flats. It has a fixed differential scale type for internal settings and a 0.25-Inch NPSF internal fluid connection type. Switch is compatible with 3-Phase motor rated at 3.7 kilo-Watt at 230 VAC, 3-Phase motor rated at 2.2 kilo-Watts at 115 VAC, 1-Phase motor rated at 2.2 kilo-Watts at 230 VAC, 1-Phase motor rated at 1.5 kilo-Watts at 115 VAC and rated at 0.37 kilo-Watt at 115/230 VDC. Switch operates at a rate of 10 cycles/minute and provides electrical durability of 100000 cycles at 10 cycles/minute with mechanical durability of 300000 cycles. It measures 3.71 Inch x 3.76 Inch x 3.1 Inch. It is included with a type gG, 20-Amp cartridge fuse for short circuit protection. Switch has a destruction pressure of 220 psi and gives a repeat accuracy of +/-3%. It operates and allows to store at a temperature of -33 to 257 degree Fahrenheit. Suitable for pressure control or monitoring of water pumps, compressors, agricultural/irrigation water systems, molding presses, injection molders, grinding machines, machining centers, complex and special machines. Switch is NEMA 1 and IP20 rated for use in hazardous locations. Switch is UL listed, CSA certified and meets CE standards.